Based initially on intuition, we began investigating whether a pyramid could be used to magnify the field produced by a DCT coil. Our experiments indicated that this was indeed the case.
As we have stated previously, the primary measuring instrument available to us is the human being. Changes in the manifested energy are most easily detected through the perception of music, where differences in clarity, spaciousness and the overall listening experience can be readily observed.
Pyramid Construction
The dimensions of our pyramid are a 1:1000 scale model of the Great Pyramid of Giza.
This makes the calculations particularly straightforward: one metre in the Great Pyramid is represented by one millimetre in our model.
The pyramid is made from rigid plastic and was produced using a 3D printer with an accuracy of approximately 0.1 mm.
For optimum performance, we have found that the dimensions need to be precise. It is also possible to construct a pyramid from card, as we did with our original prototype, shown in the diagram below
Setup
We have taken considerable care to ensure that the base of the pyramid is level and that its sides are aligned geographically north, south, east and west.
Magnetic declination therefore needs to be taken into account when establishing true geographic north.
The magnetic declination for your location can be calculated using the NOAA Magnetic Field Calculator.
When using a pyramid, the effect of the DCT coil is maximized when the coil is aligned geographically north/south. If its axis is positioned east/west, the effect appears to disappear altogether.
This was unexpected, but it demonstrates that the energies emanating from the pyramid are directional and somehow interact with the energies created by the DCT coil.
The extent of the field appears to be defined by the downward projection of the pyramid’s geometry.
In our installation, the pyramid is positioned as high as possible in the attic. Its projected geometry encompasses most of the first floor and the entire ground floor.
Positioning the Coil
The position of the DCT coil is critical.
We have found the best arrangement is to mount the coil horizontally and position it on the central axis of the pyramid, vertically below its apex.
As the coil is moved away from this axis, the perceived quality of the music becomes increasingly muddled. It is almost as though the energies are being focused along the central axis of the pyramid.
We can also detect what appear to be interference effects when using more than one pyramid or multiple coils tuned to the same frequency.
Stacking pyramids appeared to work, provided that they were precisely aligned and correctly orientated. However, our more recent experiments suggest that a single, accurately constructed and carefully positioned pyramid provides the best solution.
Remedy Generation
The pyramid also appears to significantly increase the rate at which DCT remedies can be produced.
When using the pyramid, we have been able to produce effective remedies through the potentizing of water in approximately 1.5 hours.
Without the pyramid, we would normally potentize the water for at least 4 hours.
Further experimentation is required to establish more precise timings and determine the optimum conditions for remedy generation.
Return to DCT contents page