There is much still to be investigated with DCT applications, and one area we have briefly explored is its interaction with crystals.
Frequencies were channeled for three different crystals:
Quartz: 43.926 kHzAmethyst: 64.972 kHzEmerald: 352.288 kHz
Experiments were conducted using two different configurations: the frequency-driven approach and the feedback approach.
Frequency-Driven Approach
For this experiment, an Amethyst crystal was placed next to the coil while a person relaxed within the field for approximately 20 minutes.
The experience included feeling light-headed, together with a sensation that awareness had become particularly focused in the head.
Feedback Approach
We also experimented with the bio-feedback configuration, where the coil is driven from the person’s own electrical field rather than from a signal generator.
For this setup, the coil was wrapped around a crystal and connected to handheld electrodes.
The experiences reported were similar to those produced by the standard feedback coil. These included tingling in the hands or arms, sensations resembling static electricity, and stimulation in the head.
Initial Observations
The frequency-driven approach appeared to magnify the effects that people experience when simply meditating while holding a crystal.
This is an area where further experimentation would be particularly valuable. Meditators who are already familiar with working with crystals could help determine whether DCT genuinely magnifies the effects they normally experience.
Our initial observations from the feedback approach were different. The effects did not appear noticeably different from those produced by the standard feedback configuration, where the coil is wound around wood. For this reason, we currently regard the feedback approach with crystals as a lower-priority avenue for further exploration.
Return to 🔗 What are the Applications of Double Coil Technology?